1 high current, high density, power connectors mcn51 series 2006.3 features 1. high current applications board-to-board connectors are ul certified for 27 a per contact. 2. hirose's unique compliant press-fit connection to the pcb (patents pending) the compliant section is designed to provide reliable and damage free connection with the plated-through-hole, reducing stresses to the pcb. 3. multiple contacts in a variety of configurations offered with 8, 16 and 30 contacts in vertical, right angle, solder and compliant press-fit terminations. 4. ul recognized, csa certified ul file no. e52653 csa file no. lr95109 applications telecom, lan and data storage equipment, high-end servers, and a wide variety of power supply devices. min.pcb thickness = 3.2 mm view of the compliant press-fit section application compliant section pcb the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
2 500 v dc 2000v ac /one minute 25 a dc frequency of 10 to 2,000 hz, overall amplitude of 1.5 mm or, acceleration of 196 m/s 2 for 2 hours in each of 3 directions. expose to a temperature of +125?c for 96 hours. expose to a temperature of -55?c for 96 hours. (-55?c: 30 minutes => 15 to 30?c: 5 minutes max. => 125?c: 30 minutes => 15 to 30?c: 5 minutes max.) 20 cycles 56 days at temperature of 40 ? 2 ? and humidity of 90% to 95% 1500 hours at temperature of 85 ? 1000 cycles leave for 96 hours in an atmosphere of 25 ppm concentration sulfur dioxide gas. 5000m ohms min. no flashover or insulation breakdown. 3m ohms max. (initial value) no electrical discontinuity of 1 ms or more no damage, cracks, or parts dislocation. contact resistance: 7m ohms max. contact resistance: 7m ohms max. contact resistance: 7m ohms max. insulation resistance: 5000m ohms min. no damage, cracks, or parts dislocation. contact resistance: 7m ohms max. insulation resistance: 5000 m ohms min. contact resistance: 7m ohms max. contact resistance: 7m ohms max. contact resistance: 7m ohms max. 1 1. insulation resistance 1 2. withstanding voltage 1 3.contact resistance 1 4. vibration 1 5.heat resistance 1 6.cold resistance 1 7.temperature cycle 1 8. humidity resistance 1 9. high temperature exposure 10.operating life 11.sulfur dioxide gas ratings operating temperature range -55?c to +125?c ( note 2 ) operating humidity level relative humidity 95% max. ( provided there is no condensation ) current rating 27 a max. ( note 1 ) voltage rating 600 v ac storage temperature range -10?c to +60?c ( note 3 ) storage humidity range 40% to +70% item specification conditions note1: refer to "current-temperature de-rating curve" (iec 512-3, test 5b) and "temperature rise curve" (iec 512-3 test 5a) on page 3. note2: the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature ra nge and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. product pin headers receptacles part material finish remarks insulator contacts insulator contacts pbt copper alloy pbt copper alloy black gold plating black gold plating ul94v-0 ---------- ul94v-0 ---------- 1 3 4 2 5 series name : mcn51 number of contacts : 8, 16, 30 connector type p : pin header s : socket receptacle rows 2 : 2 rows 3 : 3 rows contact type pfa : press-fit (through-hole diameter 2.03 mm) ds : right-angle through-hole type 1 2 3 4 5 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
3 measurements were made with 12 awg wire connected in series to all contacts. measurements were made with 12 awg wire connected in series to all contacts. b current - temperature de-rating curve b temperature rise curve (iec 512-3, test 5a) (iec 512-3, test 5b) current flow (a) ambient temperature (?c) mcn51 series de-rating curve (base line) mcn51 series temperature rise curve current flow (a) temperature rise (?c) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
4 5 0.05 10 0.05 5 45 63.65 5 10 20.37 pbt 8 9 a 1 11 2 4 5 6 7 10 3 21 12 22 13 23 14 24 15 25 16 26 17 27 18 28 19 29 20 30 57.45 5.84 15.24 6.35 ?1.93 5 fasten to the board being sure to use (american type) #2 tapping screws. recommended through-hole diameter finished hole : 2.03 dia. 0.05 mm drill diameter : 2.185 dia. 0.025 mm copper plating thickness : 70 10 m solder plating thickness : 5 to10 m board thickness : 3.2 mm min. fasten to the board being sure to use (american type) #2 tapping screws. recommended through-hole diameter finished hole : 2.03 dia. 0.05 mm drill diameter : 2.185 dia. 0.025 mm copper plating thickness : 70 10 m solder plating thickness : 5 to10 m board thickness : 3.2 mm min. 9 10 11 12 13 14 15 16 1 2 4 5 6 7 83 p b t a 5 b 5 15.39 ?1.93 c 6.35 5.84 15.24 5 a c0.1 2-(?2.54) 50.05 b0.05 50.05 d-?2.030.05 5 0.05 45 0.1 5 0.05 10 0.05 30- ?2.03 0.05 2-( ?2.54 57.45 0.1 ) cl no. no. of contacts rohs part number 589-0196-0 30 yes mcn51-30s3-pfa part number cl no. mcn51-8s2-pfa MCN51-16S2-PFA a b c no.of contacts ( d ) 33.63 53.64 15 35 27.43 47.45 8 16 589-0200-6 589-0199-9 rohs yes pcb mounting pattern pcb mounting pattern the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
5 55 5 0.05 10 0.05 2.49 7.87 3 2- ?2.54 57.45 26.82 15.24 5 45 5 10 20.37 63.65 3.71 12345678910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 pbt a ? pin header: right-angle through-hole 2-row type 3-row type 2.49 5 7.87 123 2- ?2.54 3 4 8 7 6 5 27.43 26.82 15.24 5 15 5 15.39 33.63 pbt a 3.7 5 0.05 15 0.1 5 0.05 1.02 0.1 5 0.05 45 0.1 5 0.05 10 0.05 57.45 0.2 2-( ?3.12 30- ?2.03 0.05 ) cl no. no. of contacts rohs part number 589-0195-8 30 yes mcn51-30p3-ds cl no. no. of contacts rohs part number 589-0202-1 8 yes mcn51-8p2-ds pcb mounting pattern 2-( ?3.12 ) 1.02 0.1 5 0.05 15 0.1 5 0.05 8- ?2.03 0.05 27.43 0.1 pcb mounting pattern the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
6 12345678 10 11 12 13 14 15 16 9 pbt ?1.93 5 7.87 47.45 15.39 15.24 5 35 5 5.84 53.64 6.35 fasten to the board being sure to use (american type) #2 tapping screws. recommended through-hole diameter finished hole : 2.03 dia. 0.05 mm drill diameter : 2.185 dia. 0.025 mm 47.45 0.1 2-( ? 2.54 ) 5 0.05 35 0.05 5 0.05 16- ?2.03 0.05 cl no. no. of contacts rohs part number 589-0201-9 16 yes mcn51-16p2-pfa pcb mounting pattern copper plating thickness : 70 10 m solder plating thickness : 5 to10 m board thickness : 3.2 mm min. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
